PARASOL Zenith VAV

The product is based on a PARASOL Zenith, but is also equipped with functions for demand-control of the indoor climate. PARASOL Zenith VAV with its mounted Control Equipment, demand-controlled air flow and cooling and heating for the best energy efficiency and comfort. PARASOL Zenith VAV includes an integrated damper that regulates the product’s slot openings and thus the air flow. With our unique control sequence we always ensure that the comfort module supplies the room with the right flow in each operating case. By maintaining a high velocity across the slot openings, we also realis a good coanda effect and with that good comfort.

The face plate of the product is always “flush”, i.e. always in line with the suspended ceiling which gives a stylish and discreet installation. The double outlets means that there is no need to lower the face plate for high air flow rates, maximum capacity (induction) is still achieved.

The casing is manufactured in galvanized sheet steel (zinc plated) The face plate is in prepainted sheet steel and aluminium RAL 9003, Coil in copper and aluminium.

Standard colour:

• RAL 9003 White (Signal white), gloss ratio 30 ± 6%

Alternative standard colours:

• RAL 7037 Grey (Dusty gray), gloss ratio 30-40%)
• RAL 9010 White (Pure white), gloss ratio 30-40%)
• RAL 9005 Black (Jet black), gloss ratio 30-40%)
• RAL 9006 White (White aluminium), gloss ratio 70-80%)
• RAL 9007 Grey (Grey aluminium), gloss ratio 70-80%)
• Other colours available on request

PARASOL Zenith VAV can be adapted and combined to meet comfort requirements in most projects. PARASOL Zenith VAV is a complete and fully flexible product with an adjustable Air Distribution pattern with the help of ADC and the possibility of factory mounted accessories. Depending on the size, you can order PARASOL Zenith VAV with air connections on any long or short side,

PARASOL Zenith VAV is available as a variant with a foldout coil for easy access to the complete heat exchanger.

For installation in an existing T-bar system, the product is stabilised by the T-bar system and in this case it is sufficient to suspend the product from two brackets (diagonal).The order range includes module dimensions to fit the standardised ceiling measurement c-c 600, 625 and 675 mm. In addition, there is a mounting frame for drywall ceilings and ceiling solutions of the clip-in-type, for Dampa and FineLine. In order to guarantee a good fit in T-bar systems, we recommend T sections with a width of 24 mm.

PARASOL Zenith VAV is built on a platform with very compact dimensions. In many cases the design permits installation in the existing T-bar system without the need of dismantling, provided that there is at least 300 mm of space between the suspended ceiling and the joists. The slim design and lightweight result in simpler handling, especially when handling the products on the site, which gives less handling damage and a better working environment. Parasol Zenith’s compact units fit most common modular dimensions and fit most suspended ceiling system on the market. As standard the units include four mounting brackets. These are adjustable +/- 20 mm in both directions and in doing so create the adjustment range normally required during installation.

The order range includes module dimensions to fit the standardised ceiling measurement c-c 600, 625 and 675 mm. In addition, there is a mounting frame for drywall ceilings and ceiling solutions of the clip-in-type, for Dampa and FineLine. In order to guarantee a good fit in T-bar systems, we recommend T sections with a width of 24 mm.